Question 1

What is the hourly rate for contractors in Arizona?

Accepted Answer

The average hourly rate for employees at Arizona Contracting ranges from $25 to $33.

Question 2

Why do general contractors charge so much?

Accepted Answer

The value of a good general contractor encompasses high-level service, which is more likely to provide a positive experience, as good home improvement services entail substantial investments in hidden details, making them comparatively more expensive due to the requirement of extensive resources such as time, expertise, and money.

Question 3

How much does a handyman make an hour in Arizona?

Accepted Answer

The average hourly pay for a Handyman in Arizona is $25.12 as of November 12, 2023.

Question 4

How do you negotiate an hourly rate for a contractor?

Accepted Answer

To negotiate your next contract rate effectively, follow these steps: Determine your minimum acceptable rate, understand your industry and your value as a contractor, take into account geographical location's impact on pay, consider unique client-specific factors, gather a range of hourly rates from potential clients, and initiate negotiations with a higher rate.

Question 5

What is typical general contractor mark up?

Accepted Answer

As a general contractor, your profit margin, which is the amount remaining after covering all job expenses, is typically determined as a percentage, with the average markup ranging from 7% to 20% or higher.

Question 6

How do you calculate contractor rate?

Accepted Answer

To calculate a contractor hourly rate, you can use the following formulas: Divide the annual salary of a full-time employee with similar job duties by (40 hours per week x 52 weeks) to determine the contractor hourly rate, or subtract the desired revenue from the value of the assignment to calculate the contractor per project rate, which can be useful for outsourcing projects like Dina's Data's IT project for its clients.

Question 7

What can a handyman legally do in AZ?

Accepted Answer

In accordance with Arizona handyman laws, individuals without a license are permitted to engage in minor repairs, carpentry, or basic maintenance without the requirement of a building permit, encompassing activities such as light fixture replacement, drywall installation, window repairs, and furniture assembly.

Question 8

What is the handyman limit in Arizona?

Accepted Answer

Generally, a contractor's license is necessary for projects totaling $1,000 or more in combined labor and material costs or when a building permit is mandated; however, individuals exempt from holding an Arizona Registrar of Contractors' (ROC) license must explicitly include the phrase "not a licensed contractor" in all forms of advertising.

Question 9

Do you need a license to be a handyman in Arizona?

Accepted Answer

In Arizona, a handyman license is required for tasks exceeding a value of $1,000, while for smaller repairs and services under this threshold, such as painting, drywall work, and furniture assembly, no license is necessary.

Question 10

Do general contractors negotiate?

Accepted Answer

Numerous contractors are open to cost reduction and negotiation of specific contract terms when competing for projects, as demonstrated by over 80% of contractors surveyed in a recent Angie's List poll who expressed their willingness to lower their prices in pursuit of securing a job.

Question 11

Is it OK to negotiate hourly pay?

Accepted Answer

Surprisingly, you are not obligated to accept the hourly rate initially offered by a business during your job search, as there is often room for negotiation, and it's a misconception that salary negotiation is exclusive to roles demanding extensive experience and a college degree.

Question 12

How far off can an estimate be?

Accepted Answer

An estimate is not an exact figure, and it's reasonable for the final cost to exceed the estimate by anywhere from 5% to 20%, underscoring the importance of adhering to your budget and allowing for a margin before commencing any project.

Question 13

Do contractors usually mark up materials?

Accepted Answer

Markups can differ among contractors and even between projects, but as a general guideline, the typical markup on materials falls within the range of 7.5% to 10%, although some contractors may mark up materials by as much as 20 percent, as noted by the Corporate Finance Institute.

Question 14

What is a good profit margin for a general contractor?

Accepted Answer

According to industry experts, construction companies typically maintain an average gross profit margin of approximately 20%, but their average net profit margin typically falls within the range of 2% to 10%, underscoring the fact that construction is a sector known for its inherently low profit margins.

Question 15

What do most handyman charge per hour?

Accepted Answer

Handymen typically charge hourly rates ranging from $40 to $139, with an average range of $60 to $75 per hour, and for small jobs, a minimum charge of $60 to $100 may apply.

Question 16

Should I charge hourly or daily?

Accepted Answer

Opting for a day rate can be a cost-effective choice to avoid additional charges for revisions, making it a preferred method for creative industries, while administrative work may often warrant an hourly rate, depending on the client's preference.

Question 17

How much work can you do without a contractor license in Arizona?

Accepted Answer

Generally, all contractors must be licensed if the combined cost of labor and materials exceeds $1,000 or if a permit is required, irrespective of the labor and material expenses.

Question 18

Is it illegal to hire an unlicensed contractor in Arizona?

Accepted Answer

In Arizona, it is explicitly illegal for an individual or entity to submit a proposal, respond to a request for work, claim the ability to perform, and carry out construction work without a valid license.

Question 19

What can an unlicensed handyman do in Arizona?

Accepted Answer

No Arizona handyman license is required for performing minor work valued at less than $1,000, which encompasses repairs and small alterations not necessitating building permits.

Question 20

Does Arizona allow independent contractors?

Accepted Answer

In Arizona, independent contractor relationships are permitted and governed by A.R.S. 23-1601, with a worker being presumed to be a contractor if the statute's provisions are adhered to.

Question 21

How much does it cost to get a Contractors license in Arizona?

Accepted Answer

The cost of obtaining a contractor license in Arizona depends on the class and license type, with a general commercial license (class A, B-1, B-2) requiring a total of $780, comprising a $200 application fee and a $580 license fee, and this license does not include a recovery fund assessment fee.

Question 22

Do subcontractors need a license in Arizona?

Accepted Answer

In Arizona, the majority of construction contractors, including both prime and subcontractors, are required to obtain a license from the Arizona Registrar of Contractors, with certain exemptions, necessitating the submission of an application demonstrating successful completion of written exams, fulfillment of relevant experience prerequisites, and the provision of adequate bonding.

Question 23

Is it normal for a contractor to ask for 50% down?

Accepted Answer

The upfront deposit amount requested by contractors varies, primarily contingent on the project's size, with smaller projects such as a $16,000 bathroom remodel often requiring a 50% deposit, while larger endeavors like a $100,000 full-home renovation typically entail a 10% to 20% deposit.

Question 24

Should I tell a contractor my budget?

Accepted Answer

When asked about your budget by the contractor, it is essential to be honest and transparent, especially since the contractor's team will be working in your home for an extended period, allowing them to provide guidance aligned with your financial and aesthetic objectives.

Question 25

How do you politely ask for a counter offer?

Accepted Answer

To politely request a counteroffer, begin by expressing gratitude for the job offer and enthusiasm for the opportunity, followed by an explanation of your motivations, emphasizing your qualifications and the value you can contribute to the organization.

Question 26

How do I not get ripped off by a contractor?

Accepted Answer

When evaluating a contractor, conduct a thorough review search, including both positive and negative feedback, consult your state attorney general's office and the Better Business Bureau for potential complaints, examine their public company reviews on social networks and trusted review websites, and maintain comprehensive records throughout the process.

Question 27

How can you avoid being scammed by a contractor?

Accepted Answer

When seeking contractor recommendations, consult friends, family, and associates, refrain from cash payments, ensure the individual holds the necessary contractor license for the specific task, and secure a comprehensive written contract outlining all work plan details, even for minor projects.

Question 28

Is it normal for a contractor to charge for an estimate?

Accepted Answer

Business philosophy plays a role, as some companies view free estimates as speculative while considering paid estimates as more accurate, while others seek compensation for their estimation work, and some contractors believe charging for estimates helps filter out less committed clients.

Question 29

Is there a legal difference between a quote and an estimate?

Accepted Answer

In contrast to a quotation, an estimate lacks legal binding and may be subject to upward or downward adjustments based on scope changes, with project managers typically initiating a project with an estimate and subsequently converting it into a final invoice as more precise project details emerge.

Question 30

How do I protect myself when paying a contractor?

Accepted Answer

Obtain certificates of insurance for Liability Insurance and Workers Compensation Insurance, and ensure the receipt of a signed and notarized lien waiver with each payment, as mechanics liens are easily filed and challenging to resolve, making regular lien waivers a crucial precaution.

Question 31

What do most contractors charge per hour?

Accepted Answer

General contractor costs typically encompass a fee percentage ranging from 10% to 20% of construction costs for larger projects, while smaller jobs may involve fixed, daily, or hourly rates, with contractor hourly rates averaging between $50 to $150 per hour.

Question 32

What is normal general contractor markup?

Accepted Answer

The profit margin for a general contractor represents the amount remaining after covering all job expenses and is typically calculated as a percentage, with the average markup ranging from 7% to 20% or even higher.

Question 33

What is the average overhead and profit for a general contractor?

Accepted Answer

A recommended starting point for a good margin in construction is 20% based on the "10-10 rule," signifying 10% for overhead and 10% for profit, which is commonly regarded as an industry standard, although there is no strict rule due to variations in construction companies' size, operations, and financial situations.

Question 34

Can you make a lot of money as an independent contractor?

Accepted Answer

While the gig economy can offer opportunities for hardworking individuals, it is crucial to calculate your hourly rate diligently, as despite approximately 25% of people participating in the gig economy, many may not earn a favorable hourly wage, with the average income for independent contractors standing at just $20.

Question 35

Why are handyman so expensive?

Accepted Answer

Inflation has significantly increased the costs of labor, materials, and gas in recent years, and it's essential to recognize that maintenance technicians perform skilled labor, requiring a specialized skill set to handle various tasks.

Question 36

What is a reasonable cost for labor?

Accepted Answer

Labor cost percentages typically average around 25% to 30% of revenue, with variations depending on the industry, as service-oriented companies may have labor cost percentages reaching 50% or higher, while production companies aim to maintain this percentage below 30%.

Question 37

Is it better to charge hourly or by project?

Accepted Answer

A recommended approach is to initially establish an hourly rate when engaging with a client to build rapport and familiarity, subsequently transitioning to a project rate once you have a better understanding of the project's time requirements.

Question 38

How do you tell a contractor their quote is too high?

Accepted Answer

When faced with a quoted bid that seems excessively high, it's advisable to inquire, ideally during the bidding phase, about potential strategies the contractor can employ to lower the cost, as they may have insights on adjusting the project to align with your budget, particularly considering that certain materials can significantly impact expenses.

Best Commercial General Contractors Near Me

Logistics coordination

Qualities to Look for in a Commercial General Contractor